1 Introduction 12/2008
1.3 Operating concept
© Siemens AG 2008 All Rights Reserved
1-14 ePS Network Services, Function Manual (FH) - Release 12/2008
1.3 Operating concept
Overview
The functions of the ePS Network Services are divided into five main categories
which can be reached via tabs. The "Machine information" and "Set up functions"
tabs always apply to the selected machine.
Note
The availability of each function to the machine operator in each of the various
roles is described in the Appendix.
Please see the descriptions in each section for details of the functions.
Fig. 1-1: Basic principle of operation
Tab / Section Description
Machine
information
The "Machine information" tab contains
important information on a particular
selected machine.
It is divided into the following areas:
• Machine overview
• Maintenance
• Fault services
• Remote access
ACTION
Setting up
functions
The "Set up functions" tab allows you to
make all the settings that apply to a
particular selected machine.
It is divided into the following areas:
• Maintenance
• Fault services
• Global settings
• Copying function settings
• Client/server communication
ACTION
To Next Page
Loading...
