5 Statistics/export 12/2008
5.2 Import
© Siemens AG 2008 All Rights Reserved
5-212 ePS Network Services, Function Manual (FH) - Release 12/2008
5.2.2 Importing a file
Description of functions
The Import file function enables data files resulting from "Robust operation" to be
individually transferred to the ePS server. This data must first have been
transferred to an external data medium (PC, notebook, PG, etc.) via the "Data
backup" function described in the "Import" section. You can also change the
suggested e-mail address if you want to receive notification after import.
Fig. 5-20: Importing a file
Note
Before importing data files from "Robust operation", if necessary, you should
activate the notification limit (see Section 3.5.1 "Setting the notification limit") to
avoid generating an excessive number of notifications. This is only necessary if you
have used notifications within the control monitor function.
5.2.3 Importing a directory (requires ActiveX)
Description of functions
The Import directory function enables transfer of data resulting from "Robust
operation" to the ePS server, even from several different machines. This data must
have been transferred to an external data medium first (PC, notebook, PG, etc.) via
the "Data backup" ePS function available on the HMI.
All data must be in one directory. You can also change the suggested e-mail
address if you want to receive notification after import.
Fig. 5-21: Importing a directory
To Next Page
Loading...
