3 Setting up functions 12/2008
3.3 ePS variables
© Siemens AG 2008 All Rights Reserved
3-98 ePS Network Services, Function Manual (FH) - Release 12/2008
To add, remove, or change the sequence of measurement series, these are
selected in the overview displayed and moved by dragging and dropping or using
the arrow buttons on the form.
A test series can only contain measurement series in one channel. It is not possible
to change the channel of a test series.
Availability and privileges
Test series can only be configured on the PC. The authorization required for
configuring the test series is described in detail in the Appendix.
3.3 ePS variables
3.3.1 ePS variables – List view
Description of functions
With ePS variables, values created by the user in ePS configured logic can be
processed. These values are defined as ePS variables to enable them to be
addressed throughout the ePS logic.
Fig. 3-15: ePS variables – List view
Field Content Type
Remaining memory
Remaining
performance
PLC settings
See PLC trigger.
DISPLAY
"New" icon Switches to the menu for creating new
logic for an ePS variable.
ACTION
To Next Page
Loading...
