12/2008 7 Establishing a connection and diagnostics
7.1 Connecting a machine to the HMI
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
7-249
7.1.5 Editing the prolog and epilog program
Editing the prolog and epilog program
The prolog and epilog program is reloaded into the control with name
"N_EPS_PROLOGEPILOG_SPF" every time a test is run. HMI Advanced can be
used as program editor on the operator panel in order to adjust this program.
Fig. 7-17: Example of a prolog and epilog program
To Next Page
Loading...
