12/2008 7 Establishing a connection and diagnostics
7.1 Connecting a machine to the HMI
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
7-239
7 Establishing a connection and diagnostics
7.1 Connecting a machine to the HMI
Description
To use the ePS Network Services on a control, the following steps must be
performed:
1. An administrator creates the machine with the associated master data on the
ePS Network Server.
2. It is then necessary to register the machine. The machine is then given an
identifier by the ePS Network Server that identifies it uniquely.
3. This machine will be connected with the ePS Network Server.
4. The alarm model can then be uploaded and the machine synchronized.
7
To Next Page
Loading...
