3 Setting up functions 12/2008
3.4 Fault services
© Siemens AG 2008 All Rights Reserved
3-138 ePS Network Services, Function Manual (FH) - Release 12/2008
Notice
If diagnostic actions are also to be carried out in the control monitor that contains
a workflow action, it is essential for Entries in the machine event history to be
selected for the control monitor.
3.4.16 Diagnostic actions
Summary
The following actions are available:
Please select the type of diagnostic action required
Add a diagnostic action
►
Upload files
►
Upload HMI action log
►
Uploading machine data
►
Upload NC status data
►
Execute and upload PLC trace
►
Upload PLC data
►
Trigger variable monitor(s)
Description of the "Upload files" function
The diagnostic action "Upload files" is used to upload any files from the file system
of the SINUMERIK and the NC onto the ePS server on a trigger event.
In the column with the paper clip, the collection of uploaded files can be marked for
sending as an attachment for a notification of the workflow for this control monitor.
Fig. 3-39: Upload files
To Next Page
Loading...
