12/2008 7 Establishing a connection and diagnostics
7.1 Connecting a machine to the HMI
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
7-245
7.1.3 Disconnecting the machine (at HMI and PC)
Operating procedure on the HMI
A machine is disconnected from the database:
Fig. 7-10: Disconnecting a machine on the HMI
Fig. 7-11: Confirming disconnection on the HMI
After disconnection, all the information regarding the database has been removed
from the local hard disk of the PCU.
To Next Page
Loading...
