4 Organizational tasks 12/2008
4.1 Maintenance
© Siemens AG 2008 All Rights Reserved
4-172 ePS Network Services, Function Manual (FH) - Release 12/2008
Field Content Type
The status of a maintenance job is "new"
when it is has not yet begun or when it is
due.
The job can be opened to carry out the
maintenance procedure.
The job can also be closed right away as
OK or not OK.
The status of a closed job can no longer
be changed.
An opened job can be closed again
without editing by resetting it to new.
Machine ID Display of the machine ID from the
machine master data, which differs for the
same job depending on whether the
maintenance job list is viewed from the
point of view of any given partner, or from
your point of view
DISPLAY
Name Designation of the maintenance schedule,
which the user has specified during
configuration
DISPLAY
Authors Here, the system automatically enters the
user logged onto ePS who has most
recently opened the maintenance job on
the machine operator panel.
DISPLAY
Responsible
org.
Indicates the organization configured in
the maintenance schedule as taking
responsibility
The user can select a different
organization to be responsible for this
particular maintenance job, from a drop
down list box.
DISPLAY
SELECTION
EDIT
(See also: Master
data of the
machine)
Work instruction Description of the maintenance
procedures to be performed. This field
displays the work instructions for the
maintenance personnel.
DISPLAY
EDIT
(Max. 2000
characters;
including blanks)
Files In order to provide a more detailed
description of the job, additional
documents can be attached in PDF format
by means of "Add file", or can be attached
for this job on an individual basis. It is also
possible to directly view files that have
already been attached.
DISPLAY
SELECTION
To Next Page
Loading...
