Siemens SINUMERIK 840Di sl - Page 155

12/2008 3 Setting up functions
3.6 Copying
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
3-155
Copying from the source machine to the target machine:
Element Action
The arrow displays the preselected user configurations on the
target machine.
The "X" is used to discard the selected user configurations on the
target machine preselected for copying to the target machine.
This icon represents the copying to the target machine.
This icon represents an overwrite of the user configuration on the
target machine.
OK
"OK" confirms that the copying process is to be performed.
Back
"Backward" cancels the copying process without performing any
copy.
Result
The copying process is complete when the copy log is displayed.
Fig. 3-53: Copy log