12/2008 Preface
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
iii
Preface
SINUMERIK documentation
The SINUMERIK documentation is available in three versions:
• General documentation
• User documentation
• Manufacturer/service documentation
A monthly overview of publications with the available languages is available on the
Internet at:
http://www.siemens.com/motioncontrol
Follow menu items "Support" "Technical Documentation" "Ordering
Documentation" "Printed Documentation".
The Internet version of the DOConCD (DOConWEB) is available at:
http://www.automation.siemens.com/doconweb
Information about training courses and FAQs (frequently asked questions) are
available on the Internet under:
http://www.siemens.com/motioncontrol
, under the menu item "Support".
Target group
This publication is intended for project engineers, programmers, technologists (of
machine manufacturers), and system startup engineers (of systems/machines).
Use
The Function Manual describes the functions so that the target group is familiar
with and can select them. It provides the target group with the information required
to implement the functions.
Utilization phase: Planning and configuration phase, implementation phase, setup
and commissioning phase
Standard scope
This documentation only describes the functionality of the standard version. Additi-
ons or revisions made by the machine tool manufacturer are documented by the
machine tool manufacturer.
Other functions not described in this documentation might be executable in the
control. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
To Next Page
Loading...
Need help?
General
