2 Maschine information 12/2008
2.1 Machine overview
© Siemens AG 2008 All Rights Reserved
2-32 ePS Network Services, Function Manual (FH) - Release 12/2008
Function Description
PLC trace: Markings Markings can be set in the PLC trace display
that are used for the difference calculation and
display of the current values.
The markings are retained when using the
zoom function. Depending on the resolution,
they can be positioned on a cycle-specific
basis; the minimum level of precision that can
be set is the pixel level, where all cycles appear
between the markings.
PLC trace: Data
export
The PLC trace data can be exported as a file
for further processing.
PLC trace: Printing
data
The PLC trace data can be printed on an
installed printer.
PLC trace:
representation
The window for the PLC trace display can be
maximized/minimized.
Fig. 2-11: PLC trace values displayed vertically
To Next Page
Loading...
