2 Maschine information 12/2008
2.5 Remote access
© Siemens AG 2008 All Rights Reserved
2-72 ePS Network Services, Function Manual (FH) - Release 12/2008
Fig. 2-40: Directory structure
4. Open a directory with a double-click. Click the back arrow to go to the next
level up.
To select several files, hold the <CTRL> key down during selection.
5. Data transfer is started by clicking the arrow buttons.
When data transfer has been started, the progress of transfer is indicated,
allowing you to estimate the remaining transfer time.
6. You can end the file transfer with the "X" button.
Fig. 2-41: End file transfer
To Next Page
Loading...
