Siemens SIRIUS 3RW55 - 7.4 Motor Protection

Parameters [4/12]
Soft Starter
Setting
Factory
Setting
Customer
∟ Deactivated
∟ Thermoclick
∟ PTC type A
∟ Temperature sensor
∟ Sensor type
∟ Response to overload temperature sensor
∟ Turn off without restart
∟ Turn off with restart
∟ Warn
∟ Creep speed
∟ Creep speed factor right
∟ Creep speed torque right
∟ Creep speed factor left
∟ Creep speed torque left
∟ Condition Monitoring
∟ Current monitoring
∟ Upper limit
∟ Do not turn off
∟ Turn off
∟ Do not turn off
∟ Turn off
∟ Do not turn off
∟ Turn off
∟ Do not turn off
∟ Turn off
∟ Lower limit
∟ Reference value
∟ Upper limit
∟ Lower limit
∟ Upper limit - error
∟ Upper limit - maintenance demanded
∟ Response to error
∟ Lower limit - error
∟ Lower limit - maintenance demanded
∟ Response to error
∟ Upper limit - error
∟ Upper limit - maintenance demanded
∟ Response to error
∟ Lower limit - error
∟ Lower limit - maintenance demanded
∟ Response to error
∟ Active power monitoring
x
0 W
0 %
0 %
0 %
50 %
0 %
x
x
7
x
7
50 %
0 %
0 %
x
0 %
0 %
x
Parameter assignment
6.7 Menu of the 3RW5 HMI High Feature
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
108 Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006