Siemens SIRIUS 3RW55 - Page 109

Parameters [5/12]
Soft Starter
Setting
Factory
Setting
Customer
∟ Switching frequency monitoring
∟ Mode
∟ Starting time monitoring
∟ Pump cleaning
∟ Preset starting time
∟ Upper limit - maintenance demanded
∟ Lower limit - maintenance demanded
∟ Warning with lock-out
∟ Warning without lock-out
∟ Turn off without restart
∟ Turn off with restart
∟ Monitoring time 1
∟ Monitoring time 2
∟ Maximum number of starts
∟ Response to ON-command during active monit. time
∟ Deactivated
∟ OFF - ON
∟ ON - ON
∟ Mode
∟ Operating parameters
∟ Parameter set 3
∟ Parameter set 2
∟ Parameter set 1
∟ Time
∟ Cycles
∟ Start/stop parameters
∟ Deactivated
∟ Manual
∟ Disable
∟ Manually enable/disable
∟ Enable
∟ Manually enable/disable
∟ Disable
- Parameter set 2 [...]
1)
- Parameter set 3 [...]
1)
- Asymmetry
∟ Limit - warning
∟ Limit - error
- Ground fault
∟ Limit - warning
∟ Limit - error
- Emergency mode
∟ Emergency start
∟ Emergency running
2)
x
x
x
x
0 s
0 s
2
10 s
0 %
0 %
20 s
3
x
0 %
30 %
0 %
20 %
x
1)
Further menu items such as Parameter set 1.
2)
3RW5 HMI High Feature from 󹪝rmware version V3.0
Parameter assignment
6.7 Menu of the 3RW5 HMI High Feature
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006 109