Siemens SIRIUS 3RW55 - Page 110

Parameters [6/12]
Soft Starter
Setting
Factory
Setting
Customer
- Inputs
∟ Input 1-Action
∟ Motor CW with PS1
∟ Motor CCW with PS3
∟ Motor CCW with PS2
∟ Motor CCW with PS1
∟ Operating mode manual - local
∟ No action
∟ Emergency start
∟ Use alternative stopping mode
∟ Reset
∟ Creep speed
∟ Quick-stop
∟ Pump cleaning - mode
∟ Motor standstill
∟ Motor CW with PS3
∟ Motor CW with PS2
∟ Input 2-Action
∟ Input 4-Action
∟ Input 3-Action
∟ No action
∟ [...]
1)
∟ No action
∟ [...]
1)
∟ Reset
∟ [...]
1)
- Outputs
∟ Digital output 1
∟ Action
∟ On time motor (RUN)
∟ Group warning
∟ Group error
∟ Generator operation
∟ Device on
∟ Device error
∟ DC brake contactor
∟ Control source PIQ-DQ-2.0 output 3
∟ Control source PIQ-DQ-1.1 output 2
∟ Control source PIQ-DQ-1.0 output 1
∟ Control source input 4
∟ Control source input 3
∟ Control source input 2
∟ Control source input 1
x
x
x
x
x
1)
Further menu items such as Input 1‑Action.
Parameter assignment
6.7 Menu of the 3RW5 HMI High Feature
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
110 Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006