Siemens SIRIUS 3RW55 - Page 111

Parameters [7/12]
Soft Starter
Setting
Factory
Setting
Customer
∟ ON delay
∟ OFF delay
∟ Control command motor ON
∟ CM - maintenance demanded
∟ CM - error
∟ Bus error
∟ Alternative stopping mode active
∟ Start-up
∟ Run-down
∟ Reversing switching element - right
∟ Reversing switching element - left
∟ Ready to start for motor ON
∟ Pump cleaning active
∟ No action
∟ Operation / Run-down
∟ External bypass
1)
∟ Operation / bypass
∟ ON delay
∟ OFF delay
∟ ON delay
∟ OFF delay
∟ Action
∟ Action
∟ Analog output
∟ Digital output 4
∟ Digital output 2
∟ Output signal type
∟ No action
∟ [...]
2)
∟ Group error
∟ [...]
2)
∟ Deactivated
∟ 4-20 mA
∟ 0-10 V
x
x
x
0 s
0 s
0 s
0 s
0 s
0 s
1)
3RW5 HMI High Feature from 󹪝rmware version V2.0
2)
Further menu items such as Digital output 1.
Parameter assignment
6.7 Menu of the 3RW5 HMI High Feature
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006 111