Siemens SIRIUS 3RW55 - Page 112

Parameters [8/12]
Soft Starter
Setting
Factory
Setting
Customer
∟ Deactivated
∟ Active power
∟ Active energy import total
∟ Switching element heating
∟ Power factor L1...3
∟ Phase current I L3 (rms)
∟ Phase current I L3 (%)
∟ Phase current I L2 (rms)
∟ Phase current I L2 (%)
∟ Phase current I L1 (rms)
∟ Phase current I L1 (%)
∟ Phase current average (rms)
∟ Phase current average (%)
∟ Motor temperature rise
∟ Line voltage U L3-L1 (rms)
∟ Line voltage U L2-L3 (rms)
∟ Line voltage U L1-L2 (rms)
∟ Measured value
- Ex operation
2)
∟ Ex application
∟ Ex-relevant parameters
- Additional parameters
∟ Operation with CPU / Master
∟ Phase current I L1 (rms)
∟ [...]
1)
∟ Range start value
∟ Range end value
∟ Cyclic send data
∟ Measured value 1
∟ Measured value 2
∟ Measured value 3
∟ Phase current I L2 (rms)
∟ [...]
1)
∟ Phase current I L3 (rms)
∟ [...]
1)
∟ Response to CPU/Master Stop
∟ Switch substitute value
∟ Keep last value
x
x
x
x
0
27648
1)
Further menu items. Refer to chapter Cyclic send data (Page 205).
2)
3RW5 HMI High Feature from 󹪝rmware version V2.0
Parameter assignment
6.7 Menu of the 3RW5 HMI High Feature
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
112 Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006