Siemens SIRIUS 3SK1

Mounting
8.14 Mounting 90 mm devices with device connectors on the wall
3SK1 safety relays
Manual, 04/2013, A5E02526190021A/RS-AA/01
151
8.14 Mounting 90 mm devices with device connectors on the wall
Requirements
Please note the following requirements for mounting on a level surface:
● Please observe the information about the mounting position in the chapter "General
technical data (Page 193)".
● Please note the spaci
ng of the drilled holes in the chapter "Dimension drawings for 3SK1
devices
(Page 243)" and "Dimension drawings 3SK1 device connectors (Page 251)".
● Two properl
y executed drill holes with thread or plug on the level surface (per device
connector)
● Two screws (per device connector) to fit the holes M4 x12 in accordance with DIN 784
● Device connector
Please refer to the accessories list for the relevant order number in the chapter
"Accessories (Page 257)".