Siemens SITRANS F FM100 - Menu Mode

SITRANS FM100
page 18 A5E48762204-AA
9.3 Menu Mode
In menu mode, all device parameters can be set. The individual parameters are
arranged in menu groups by function. While the menu mode is activated, the
signal processing and the outputs are still active in the background. However, all
display parameters and outputs are updated after exiting the menu mode or in the
measuring mode.
Note: The menu mode will exit automatically after a certain time without using the
buttons, if the parameter “Menu Timeout” is set not equal to “0”.
9.3.1 Parameter setting
9.3.1.1 List Selection
Parameters with predefined selection values are defined by means of list
selection. The currently selected menu item is displayed in orange text. The
selection can be moved with the keys, the key is used to accept the
selection.
To activate the menu mode, press the button for 3-5 seconds. The
parameters are divided into main groups and subgroups.
The buttons are used to select the main groups. In the main menu not all
menu groups can be shown on the display at the same time, the list of individual
menu items then scrolls up or down when the selection has reached the top or
bottom. To choose the selection, the key is pressed and the device jumps to
the corresponding submenu or parameter setting level. For selecting of
predefined parameter values and are used. After changing the value of
the parameter and confirming with the parameter is saved, and returns to the
higher menu level. To return to the main menu or to exit the menu mode, press
(repeatedly).
Step 2
Step 1 Menu button
press for 3-5 seconds
Menu
Step 3
Step 4
Parameter selection 1
Parameter selection 2
The orientation can be
selected with up and
down buttons
Apply selection
and save
This transition happens automatically
Step 5
Step 6 (exit menu)