SITRANS FM100
page 20 A5E48762204-AA
10.3 Display
10.3.1 Refresh
Parameter "Refresh" defines the time interval within which the measuring
variables are displayed. The "Refreshrate" can be increased in steps of 0.5 sec.
to 10 sec. An increase in the refresh rate time causes an increased "filtering" of
the display value.
10.3.2 Orientation
With the menu item "Orientation" the display can be rotated either clockwise or
counterclockwise in 90 ° increments. As the display rotates, both the display
contents and the function of the 4 control buttons are turned.
10.3.3 Layout
This parameter can be used to configure the display to either show one
measurement variable or two measurement variables.
10.3.4 Display value
With the aid of this parameter, the measurement variables provided by the
transmitter can be displayed. Depending on the 'Layout' display, either one or two
measuring variables can be displayed.
10.3.5 Keys HOTKEYs
Two independent user keys
are available, which can be
individually assigned with
different display functions.
The 2 user keys are available
in measurement mode top
right and left. If the buttons
are activated, they are backlit
in blue and the programmed
function can be executed by
touching.
The following functions are available:
To Next Page
Loading...
