Siemens Sitrans LR250 - Page 61

7ML19985JF02 SITRANS LR250 (PROFIBUS PA) – INSTRUCTION MANUAL Page 55
mmmmm
Parameters
2.2.1.5. High Calibration Pt.
Distance from Sensor Reference to High Calibration Point (corresponding
to High Level Point). Unit is defined in Sensor units.
2.2.1.6. Unit (Level)
Select engineering units for Level.
2.2.1.7. Low Level Point
The level when the material is at Low Calibration Point. The unit is defined
in Level units.
2.2.1.8. High Level Point
The level when the material is at High Calibration Point. The unit is defined
in Level units.
2.2.1.9. Level Offset
A constant offset that can be added to Level. The unit is defined in Level
units.
2.2.1.10. Sensor Offset
A constant offset that can be added to the sensor value
1)
to compensate if
the sensor has been changed. The units is defined in Sensor Units. (See
Transducer Block function groups on page 129 and How the Transducer
Block works: on page 129 for more detail.)
2.2.1.11. Temperature Units
Selects the engineering unit to be displayed with the value representing
temperature.
Values
Range: 0 to 20 m. Default: 0.000 m
Options
m, cm, mm, ft, in, %
*
%
Values
Default: 0%
Values
Default: 100%
Values
Default: 0%
1)
See Low Calibration Pt. (2.2.1.4.) for an illustration.
Values
Default: 0
Options
DEG C, DEG F, RANKINE, KELVIN
*DEG C