Siemens SITRANS LR500 Series - Echo Setup Configuration; Device Maintenance Schedules

Echo setup
Provides quick access to echo selection, 󹪝ltering, and response rate parameters.
Open the menu Device – Echo Pro󹪝le Utilities and click on Echo Setup.
Maintenance
You can set schedules and reminders for:
• device maintenance based on its projected lifetime
• sensor maintenance based on its projected lifetime
• service
• calibration
To set Device/Sensor Maintenance schedules:
1
. Open the menu Device – Maintenance, and click on the Remaining Device/Sensor
Lifetime tab.
2. Modify desired values, and if desired, set reminders for either or both of Reminder 1 before
Lifetime (Required)/Reminder 2 before Lifetime (Demanded).
3. Click Write.
4. Click Read, to see the e󹪜ects of your modi󹪝cation.
5. Click Snooze to add a year to the Total Expected Device Life.
Operating
8.6Remote operation
SITRANS LR500 series with mA/HART
Operating Instructions, 03/2024, A5E51099898-AA 103