Siemens ULTRAMAT 6 Series - Page 16

WARNING
Toxic and/or corrosive gases
When measuring toxic or corrosive gases, it could occur that sample gas accumulates in the
analyzer because of leaks in the gas path.
To prevent the danger of poisoning or damage to parts of the analyzer, the analyzer must be
purged. The gas displaced by purging must be collected using appropriate equipment and
disposed of environmentally-friendly via an exhaust line.
WARNING
Wetted parts unsuitable for the process medium
Danger of injury or damage to device.
Hot, toxic and aggressive process media may be released if the media is not suitable for wetted
parts of the analyzer.
• Ensure that the material of the device parts wetted by the process medium is suitable for the
medium. Read the information in the technical speci󹪝cations of the respective manual!
NOTICE
Use in home environment
This Class A Group 1 device according to CISPR 11 is intended for industrial use.
If used in homes, the device may cause radio interference.
WARNING
Insu󹪟cient protection during storage
The packaging only provides limited protection against moisture and in󹪝ltration.
• Provide additional packaging as necessary.
Safety instructions
2.2Prerequisites for safe use
Series 6 and ULTRAMAT 23
16 Compact Operating Instructions, 01/2024, A5E45779144002-AB