Signostics uscan - Entering Patient Details; Printing

P003948 Uscan User Manual Page | 30
Entering Patient Details
Patient details will be required if data is saved. Patients may already be stored in the system or they may need
to be entered.
Fig 4.4 Entering Patient Details
The source for patient names is a preference setting (see Preference SetupSettings), and may be local storage
or a remote server.
The list of patients is displayed under the Existing Patients tab.
Tap the patient name to select a from the list.
When querying patients from a remote server you may need to type a few letters into the search field to display
patients.
The Search
field can be used to find an existing patient.
Tap the Bar-code
icon or use a bar-code scanner to search using a patients bar-code.
Tap the Skip icon to bypass patient data e
ntry. Note: you will be prompted to enter patient details again when
saving the exam.
Tap the New Patient t
ab to enter the details for a new patient using the on-screen keyboard.
Printing
Tap the Printer icon to print to a Network (see Network Printer Setup (Optional)) or Bluetooth printer (see
Bluetooth Printer Setup (Optional)).
Fig 4.5 Network Printing
Network printing uses a Mopria service (see
www.mopria.org) enabling printing to thousands of
ne
twork printer types. The Uscan needs to be connected
via WiFi to the same network as the printer. To print:
 Tap the
icon.
 Tap PR
INT ALL to print all scans, or PRINT
SELECTION to print only selected scans.
 Select the printer from the drop down list.
 If required, adjust number of copies, paper size,
colo
ur, orientation, or any other options provided
by the printer.
 Tap the
icon to send to the printer.
Bar code Entry
Skip
New Patient Tab
Search for Patient
Existing Patient
Tab
Patient List