P003948 Uscan User Manual Page | 39
7. Connect to an AC source and fully recharge the system.
Fig 6.1 Mobile stand setup
Cleaning
Signostics recommends the use of a soft cloth, lightly dampened with warm water or a mild soap solution for
cleaning the mobile stand. Wipe surfaces with the moist cloth, and towel dry with a soft clean cloth.
Disinfection
Where bodily fluid or other contamination is expected, the mobile stand can be disinfected using the spray and
wipe method with a variety of disinfection products. Follow the manufacturers recommended method. The
following disinfecting means can be used with the Uscan mobile stand:
T-Spray II by Pharmaceutical Innovations of New Jersey
Sani-Cloth
®
Active by PDI of Flint, UK
Tuffie 5 Wipes by VernaCare of Lancashire, UK
Protex Disinfectant Wipes by Parker Laboratories of New Jersey
Any Isopropyl alcohol impregnated wipes with <= 70% w/w alcohol
Refer to Signostics website for additional disinfection options.
First clean the mobile stand as above. Then wipe or spray the mobile stand with disinfectant, and leave for the
disinfectant manufacturers recommended contact time. Remove any residue with a soft cloth moistened with
water.
To Next Page
Loading...