Silvercrest SSMS 600 E6 - Shredder Operation

GB
│
IE
│
9 ■
SSMS 600 E6
NOTE
► If you want to whip cream with a whisk q, hold the container at an angle
while whipping. This way, the cream will stiffen more quickly. Make sure
that no cream splashes out during whipping. Use the turbo-switch 3.
NOTE
If you hear unusual noises during operation, e.g.
squeaking or similar, apply a small amount of neutral
cooking oil to the drive shaft of the hand blender 5.
Using the shredder
NOTE
► Fill the bowl 8 only up to the 500 ml mark
when processing food
and only up to the 300 ml mark
when processing liquids.
Once you have assembled the shredder:
1) Insert the plug into the mains power socket.
2) Place the bowl 8 on a dry, level surface. The bowl 8 has silicon feet which
stop the bowl 8 does not slip easily.
3) Hold down the switch
2 to process the food at a normal speed. Turn
the speed regulator 1 towards “Max” to increase the speed. Turn the speed
regulator 1 towards “Min” to decrease the speed.
NOTE
► Hold the bowl 8 with the bowl lid 6 on with one hand while pressing the
switch
2/3 with the other hand.
► Do not remove the motor unit 4 from the bowl lid 6 while you are pressing
the switch
2/3.
4) Once you are done processing the food, simply release the pressed switch
2/3.
5) Remove the motor unit 4 from the bowl lid 6.