Figure 11: Receive a Call
When receiving a private call, the individual call icon will be displayed. When receiving
a group call, the group call icon will be displayed.
When receiving a call, press the PTT key within the preset time period to call back.
Receive Individual Calls
Unanswered received Individual calls addressed to the radio are stored in radio
memory.
The caller UID may be viewed, answered and deleted by the user as desired.
A newly received individual call addressed to the radio sounds an alert tone
periodically until the user presses any key.
If the caller UID of a newly received unanswered call is already in the Call Log list, the
old Call Log record of that UID will be replaced by the new record and added to the top
of the list.
To view/answer/delete received call records, select the Call Log menu option.
Send a Message
To send a Status, Template or Text Message, carry out the following:
1. From the default screen press the ‘Menu’ button. Select the ‘Messages’ menu.
2. On the Messages screen, select the ‘SEND STATUS’, ‘SEND TEMPLA’ or ‘NEW
MSG’ option as required.
3. When the message has been selected/created and is ready to be sent, press the
Select key to display the Send screen.
4. On the Send screen, use the ▴ and ▾ keys to select the ‘CONTACT’ option. Press
the Select key. An individual Contact Details screen from the Contact List will
be displayed.
5. To select a different contact than the one displayed, use the ▴ and ▾ keys.
6. With the correct Contact displayed, press the Select key to send the message.
Document Number: TNM-U-E-0145 Issue: 1.0 Page 14
To Next Page
Loading...
Need help?
General
