Simoco SDM600 Series User Manual

Figure 38: Send Status Menu
The information displayed on the Send Status message screen shows the unique
number and the text of the status message.
To select a different Status message, use the ▴ and ▾ keys to scroll through the
programmed status messages. Each Status message will be displayed in turn.
Press the Back key to return to the previous screen.
Press the Select key to display the Send screen, which allows you to select a Contact
from the Contacts menu. See Sending Status, Template and Text Messages on the
next page for further information.
Send Template
The Send Template menu option can be used to send a pre-formed message. Up to
100 template messages may be configured by the FPP. Each template is a pre-formed
message text, of up to 160 characters long (Tier II) and up to 52 characters for Tier III,
depending on the message format used:
n "Unicode 16 bit" UTF-16BE (IEC 61162-1 [8]) 16 bit character format - maximum 23
characters.
n "ISO 7 bit" character set (ISO/IEC 646 [11]) - maximum of 52 characters.
n "ISO 8 bit" character format (ISO/IEC 8859 [12]) - maximum of 46 characters.
The Send Template menu is only displayed if the FPP has configured one or more
templates.
Figure 39: Send Template Screen
To select a different Template message, use the ▴ and ▾ keys to scroll through the
programmed messages.
Press the Select key to display the Send screen, which allows you to select a Contact
from the Contacts menu.
Document Number: TNM-U-E-0145 Issue: 1.0 Page 31

Simoco SDM600 Series Specifications

General

Brand	Simoco
Model	SDM600 Series
Category	Radio
Language	English