Simoco SDM600 Series User Manual

Brightness
The Brightness menu allows the User to set the intensity of the control unit’s display
and key backlighting where this is possible.
Figure 18: Brightness Menu Screen
Use the ▴ and ▾ keys to select the required brightness level (range 1 to 8).
To accept and save the setting and return to the previous screen, press the Select key.
Call Divert
The Call Divert menu provides the user with the facility to have Calls, Data messages
or both diverted to another radio. This feature is only available for Tier III.
Figure 19: Call Divert Menu screen
The top part of the screen shows if any diversion are in place, while the lower part of
the screen provides the divert options.
Use the ▴ and ▾ keys to select the required divert option. Pressing the Select key will
initiate the diversion setup.
When setting up a diversion, the ID number of the radio entity to which the calls/data
are to be diverted can either be entered manually (Custom) or selected from the
Contact list (Contact).
Setup a Diversion
To Divert Calls, Data Messages or both, carry out the following:
1. On the Call Divert screen, use the ▴ and ▾ keys to select the required divert
option. Press the Select key to start the relevant divert setup. The Call Divert –
Target Type screen will be displayed.
Document Number: TNM-U-E-0145 Issue: 1.0 Page 22

Simoco SDM600 Series Specifications

General

Brand	Simoco
Model	SDM600 Series
Category	Radio
Language	English