Simpson Minilab PVF-C - Page 52

6 Operating Instructions
46 Minilab man-CH-PVF-C-V17-2
Figure 6.2.15
4. Center the flat surface of the prepared test specimen on the
Pedestal and close the Protection Doors (Figure 8.1, Item 5)
(see Figure 6.2.15).
5. Navigate to the high pressure test menu, and select menu, "High
pressure," on the Operator Panel (Figure 8.1, Item 4). Press the
“Measurement” Button (Figure 8.1, Item 5) on the enclosure door
to begin testing.