Simpson Minilab PVF-C - Introduction 1; Application and Designated Use

Introduction 1
man-CH-PVF-C-V17-2 Minilab 1
Introduction 1
Congratulations, you have just purchased an extremely reliable sand
testing instrument that is backed by the professional technical support
and years of proven sand technology experience of Simpson
Technologies Corporation.
This laboratory equipment is constructed of quality materials and is
the result of unsurpassed craftsmanship. The Minilab should be
operated only when it is in perfect condition, in accordance with its
designed purpose and while being aware of possible hazards.
Observe the safety instructions in Section 2 and operating instructions
in Section 6.
1.1 Application and Designated Use
This device is intended exclusively for producing a foundry sand
sample or measuring the strength and compactability of foundry sands
mixed with chemical and clay binders. Usage of other materials may
be possible upon consultation with the technical service of Simpson
Technologies.
Any other application outside the intended usage will be regarded as
use not in accordance with its purpose, and, therefore, the
manufacturer/supplier will not be held liable for any damage that might
arise hereunder. The risk in this case will be exclusively that of the
user.