Introduction 1
2 Minilab man-CH-PVF-C-V17-2
1.2 Organizational Measures
The operating instructions should be readily available at the place of
operation. In addition to the operating instructions, the general legal
regulations or other mandatory rules for prevention of accidents and
environmental protection should be made known and be observed!
The personnel instructed to use this apparatus, before beginning
work, should have studied and fully understood these Operating
Instructions, in particular the “Safety” chapter.
No modifications, extensions or changes of design of the device that
would impact safety requirements should be put into effect without
prior consent of the supplier! Spare parts must conform to the
technical specifications defined by the manufacturer. This is always
guaranteed when using original spares.
To Next Page
Loading...
