Operating Instructions 6
man-CH-PVF-C-V17-2 Minilab 27
6.1.2 Options
The “Options” Menu is accessed by clicking the F2 button. This menu
allows for adjustment in correction factors, calibration, printing, scale
range, force test sample, date + time, language, authorization, logging
on, and logging off. The desired setting may be adjusted by clicking on
the corresponding button.
6.1.2.1 Correction Factors
The “Correction Factors” menu under options is available to make
cosmetic test result changes if desired. This menu is only utilized by
customer in extraordinary circumstances (e.g. if a transverse specimen
being used is a different thickness than the standard specimen). The
standard value for all correction factors is 1. Deviating from the standard
is at the discretion of the customer and will result in displayed results that
do not accurately represent the force exerted during testing.
To Next Page
Loading...
