AIS Class B Transceiver
46
5.7 SimNet/NMEA2000
From the Main menu select “SimNet/NMEA2000”, and press
MENU or ►. A window opens showing the following choices:
Data Sources
Network Management
Network List
Remote Enable
DSC Radio Select
5.7.1 Data Sources
This section allows you to select a SimNet/NMEA2000 data source, to
provide compass heading information.
Note This data source must be able to supply magnetic compass heading.
From the System Setup menu select “SimNet/NMEA2000”, highlight
“Data Source” and press MENU or ►. The “Data Source” window will
open with the “Heading” Highlighted. Press MENU or ► to highlight
source list. Fig. 5.22.
Using the ▲▼ keys cycle through the options, then press MENU or ►
to select your choice.
Press ◄ to exit and return to the previous menu.
5.7.2 Network Management
From the SimNet/NMEA2000 menu select “Network Management”, and
press MENU or ►. The Network Management window opens showing
“Device Instance” and “System Instance”
•
•
•
•
•
Fig. 5.22 – Data Source menu
To Next Page
Loading...
