CA34/44/54 Waypoint / route menu Chapter 8-11
8.5 Start / stop track
The track function will provide a track trailing the movement of your
ship. As default from the factory, the first track is stored as TRACK
1, the next as TRACK 2 etc.
To star t track funct ion:
PLOT
Call up the PLOT menu
7
Load Start track pop-up window
If you wish to change the default values:
Move cursor to where you wish to make a change
+/-
Toggle between available values, or...
0-9
key in new values
ENT
Start track
Name of track can be altered (max. 25 characters).
Display track can be set ON and OFF, where OFF will make it
invisible on the screen. Turn ON to put it back on the screen.
Update of the track can be performed by distance in nautical miles,
or by time interval.
To Next Page
Loading...
Need help?
General
