Display views
15
857-160970 / Rev.H
Direct access to dialogue boxes
Several dialogue boxes are directly accessed from the various
views on the display.
Position the cursor, and right-click on the...
• Mode and frequency information in the Header view to
open the Transceiver Settings dialogue box.
• Depth value in the Header view to open the Bottom
Detector dialogue box.
• Colour scale in the Header view to open the Colour Scale
dialogue box.
• Range fieldintheEchogram and Range view to open one
of the Range dialogue boxes, depending of the current
echogram type.
• Echogram field in the Echogram and Range view to open
the Echogram dialogue box.
• Single Echo view to open the Echo Trace dialogue box.
Related topics
→ Menu bar, page 16
→ Header view, page 17
→ Echo frames, page 18
→ Status bar, page 21
→ Getting started; Operation, page 30
→ Bottom Detector, page 78
→ Colour Scale, page 81
→ Echogram, page 85
→ Bottom Range, page 80
→ Surface Range, page 115
→ Transceiver settings, page 119
→ Echo Trace, page 84