Simrad ES60 - REFERENCE MANUAL REV H User Manual

Reference guide
63
857-160970 / Rev.H
Install menu
The following commands are available on the Install menu:
→ Transceiver, page 117
→ Environment, page 89
→ Navigation, page 100
→ Trawl, page 122
→ Purse Seine, page 109
→ Heave, page 93
→ Temperature, page 116
→ Fish, page 92
→ BI500, page 76
Transceiver
This command opens the Transceiver Installation dialogue box.
Use this to install a new transceiver, and to assign a transducer
to each frequency channel.
Environment
Select this command to open the Environment dialogue box.
The settings here are used to select salt or fresh water
absorption, and to enter the sound velocity value.
Navigation
This command opens the Navigation Interface dialogue box. In
this box, you can select communication parameters for the
NMEA interface, and select input/output telegrams.
Trawl
This command option opens the Trawl Interface dialogue box.
Use these parameters to select trawl instrumentation
communication parameters; input/output telegrams.
Purse seine
This command option opens the Purse Seine dialogue box. Use
these parameters to select trawl instrumentation communication
parameters; input/output telegrams.
Heave
This command opens the Heave Sensor dialogue box. It is used
to select heave input source; analogue or RS-232.
Temperature
This command option opens the Temperature Sensor dialogue
box.
Fish
This command option opens the Fish Select dialogue box.

Simrad ES60 - REFERENCE MANUAL REV H Specifications

General

Brand	Simrad
Model	ES60 - REFERENCE MANUAL REV H
Category	Marine Equipment
Language	English