Motoring
Engine information, including analog dial for RPM (1), two dynamic
data fields (2), and bars for engine trim (3) and engine temperature
(4).
The dynamic data fields display information in the following priority:
• Priority 1
-
SOG
- Speed through water
- Speed (pitot)
• Priority 2
- Depth
• Priority 3
- Vessel fuel economy GPS
- Vessel fuel economy water
• Priority 4
- Vessel fuel rate
The needle color indicates the engine's position: white for center,
red for port and green for starboard.
The motoring page can be set up to show one or two engines. Refer
to "Engine setup" on page 64.
20
Pages | IS42 Operator Manual
To Next Page
Loading...
