Simrad is42 - Page 65

• Backlight level: Adjusts the backlight level from Min (10%) to Max
(100%) in 10% increments
-
When the Backlight level field is active, subsequent presses on
the backlight key adjusts backlight level in decrements of 30%
• Display group: Defines which network group the unit belongs to
• Night mode: Activates/deactivates the night mode color palette
• Night mode color: Sets the night mode color palette
• Invert day color: Changes the background color for the pages
from default black to white
• Sleep: Turns the backlight for screen and keys off to save power
Display mode
The IS42 unit can set up as an instrument only, as an autopilot
display only, or as a combination of those two display modes.
• Instrument display only: Displays active data pages. The Autopilot
page can be one of these data pages
• Autopilot display only: Displays only the autopilot page
• Autopilot display when engaged: Switches automatically to the
Autopilot page when the autopilot is switched to an automatic
mode. When the autopilot is switched to Standby mode the
display switches back to the previous page. This behaviour does
not require that an Autopilot page selected is as one of the 8
enabled pages
The Display mode dialog have the following additional options:
Software setup | IS42 Operator Manual
63