© Jan 2022 A-4 0607SE Maintenance Manual
REPAIR
REPAIR & INSPECTION REPORT
B-9 Test Lift/Lower Speed
B-10 Test Drive Speed
B-11 Inspect Tilt Protection
B-12 Inspect Pothole Guards
Checklist C Procedures
Items
YES/Machine is
in Good
Condition
NO/Machine Has
Damage or
Malfunction
REPAIRED/
Machine Has
Been Repaired
Problem
Description
C-1 Replace Hydraulic Oil
Tank Air Filter
C-2 Inspect Platform
Weighing System
C-3 Inspect Lift Limit Switch
C-4 Inspect Staged Lowering
Checklist D Procedures
Items
YES/Machine is
in Good
Condition
NO/Machine Has
Damage or
Malfunction
REPAIRED/
Machine Has
Been Repaired
Problem
Description
D-1 Inspect Scissor Arm
Installation Bearing
D-2 Inspect Chassis Slider
D-3 Replace Hydraulic Oil
User
Inspector Signature
Inspection Date
Inspector Title
Inspector Company
NOTES:
1. The Repair & Inspection Report shall include the inspection table of each regular inspection.
2. Duplicate the Repair & Inspection Report template for each inspection. Store the completed tables for 10 years
or until the machine is no longer in use or as required by machine owner/company/custodian.
3. Use the table to record the results. After one item is complete, check the appropriate box.
4. Record the inspection results. If any inspection results are "NO", the machine must be stopped and re-
inspected after repair is completed and the box marked "REPAIRED" shall be checked.
Select the appropriate inspection procedure based on the inspection type.
To Next Page
Loading...
