© Jan 2022 5-4 0607SE Maintenance Manual
MAINTENANCE
REPAIR & INSPECTION REPORT
B-8 Inspect Braking Device
B-9 Test Lift/Lower Speed
B-10 Test Drive Speed
B-11 Inspect Tilt Protection
B-12 Inspect Pothole Guards
Checklist C Procedures
Items
YES/Machine is
in Good
Condition
NO/Machine Has
Damage or
Malfunction
REPAIRED/
Machine Has
Been Repaired
Problem
Description
C-1 Replace Hydraulic Oil
Tank Air Filter
C-2 Inspect Platform
Weighing System
C-3 Inspect Lift Limit Switch
C-4 Inspect Staged Lowering
Checklist D Procedures
Items
YES/Machine is
in Good
Condition
NO/Machine Has
Damage or
Malfunction
REPAIRED/
Machine Has
Been Repaired
Problem
Description
D-1 Inspect Scissor Arm
Installation Bearing
D-2 Inspect Chassis Slider
D-3 Replace Hydraulic Oil
User
Inspector Signature
Inspection Date
Inspector Title
Inspector Company
MAJOR MODIFICATION AND
REPAIR RECORD
1. A major modification/repair is a modification/repair
made to all or part of a machine that affects the
stability, strength or performance of the machine.
2. Each time the machine owner/company makes a
major modification/repair to the machine, it should
be documented using the form below. Keep the
form properly until the machine is taken out of
service, or as requested by the machine owner/
company.
3. Major modifications/repairs to the machine must be
performed by a qualified service technician.
To Next Page
Loading...
