MAINTENANCE
0607SE Maintenance Manual 5-3 © Jan 2022
3. Duplicate the Repair & Inspection Report template
for each inspection. Store the completed tables for
10 years or until the machine is no longer in use or
as required by machine owner/company/custodian.
4. Use the following table to record the results. After
one item is complete, check the appropriate box.
5. Record the inspection results. If any inspection
results are “NO”, the machine must be stopped and
re-inspected after repair is completed and the box
marked “REPAIRED” shall be checked. Select the
appropriate inspection procedure based on the
inspection type.
Table 5-3
REPAIR & INSPECTION REPORT
Model
Serial No.
Checklist A Procedures
Items
YES/Machine is
in Good
Condition
NO/Machine Has
Damage or
Malfunction
REPAIRED/
Machine Has
Been Repaired
Problem
Description
A-1 Inspect All Manuals
A-2 Inspect All Decals
A-3 Inspect Damaged, Loose
or Lost Parts
A-4 Inspect Hydraulic Oil
Level
A-5 Inspect Hydraulic Oil
Leakage
A-6 Functional Tests
A-7 Inspect the Battery Level
A-8 Perform Maintenance
After 30 Days
Checklist B Procedures
Items
YES/Machine is
in Good
Condition
NO/Machine Has
Damage or
Malfunction
REPAIRED/
Machine Has
Been Repaired
Problem
Description
B-1 Inspect Electric Wires
B-2 Inspect Rim, Tire and
Fasteners
B-3 Inspect Battery
B-4 Inspect Hydraulic Oil
B-5 Inspect Hydraulic Tank
Air Filter
B-6 Inspect Manual Brake
Release
B-7 Inspect Emergency
Lowering
To Next Page
Loading...
