EasyManua.ls Logo

Siro Lasertec SL10 - Raw Material, Solvents, Oils, Greases and Other Chemical Substances

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
IM Machine Name Rev.: END 16
Laser Class
Definition
Class 4
The accessible laser radiation is very dangerous for the eyes and
dangerous for the skin. Even diffusely scattered radiation can be
dangerous. The laser beam can cause fire and explosion hazards.
Lasers of Class 4 are high power lasers. Their radiation is so
intense that damage is to be expected with any kind of exposure of
the eyes or the skin. In addition, there is the risk of fire or explosion
with lasers of this Class.
The operating company of the laser facility is responsible for compliance with the
protective measures.
Provide suitable fire-extinguishing facilities.
Ensure that the laser devices are assigned to a laser Class and are labelled
accordingly.
Report the operation of Class 3R, 3B and 4 laser facilities to the responsible
market surveillance authorities.
When operating such lasers, define and mark out the laser area.
As the operating company of Class 3R 3B and 4 laser facilities, appoint a qualified
person as Laser Protection Officer.
Instruct the personnel that operate Class 1M, 2, 2M, 3R, 3B or 4 laser facilities, or
those that can be present in the laser area of Class 1M, 2, 2M, 3R, 3B or 4 lasers,
in the effects of the laser radiation and the necessary protective measures.
Provide suitable PSR laser glasses, protective clothing or protective gloves for the
operation of Class 3R, 3B and 4 laser facilities.
The operating company is also responsible for the compliance with the special safety
requirements for the operation of the different laser types.
Raw Material, Solvents, Oils, Greases and other Chemical Substances
When handling raw material, solvents, oils, greases and other chemical
substances, observe the applicable regulations and safety data sheets of the
manufacturers of these substances with respect to storage, handling, use and
disposal and comply with them.
All work with corrosive cleaning agents and substances can cause serious
chemical burns and serious eye injuries!
Therefore, always wear personal protective equipment during all work with
chemical substances:
Safety glasses,
Safety gloves,
Protective clothing resistant to the substances,
Safety shoes.

Table of Contents

Other manuals for Siro Lasertec SL10