IM Machine Name Rev.: END 6
This is a warning of a potentially dangerous situation possibly
resulting in material damage if the specific instruction is not
followed exactly.
This is an indication of useful information about safe and proper
handling.
● Observe the warning signs, operating labels or component markings attached to
the welding laser system. They must not be removed.
● Always maintain these signs and symbols in a fully legible condition.
2.2 Intended Purpose
The welding laser system is working equipment for the welding of metal joints by
means of pulsed laser beams
● Observe the specifications in Chapter 3, Section Technical Data.
Always comply unequivocally with these specifications.
Also belonging to use for the intended purpose is the compliance with the instructions
– for safety,
– for operation and control,
– for maintenance and service,
specified in this instruction manual.
Other uses or use over and above this shall be considered as use not for the
intended purpose. The operating company shall bear the sole liability for any
damages resulting from this. This shall also likewise apply to any unauthorized
modifications made to the welding laser system .
2.3 Reasonably Foreseeable Misuse
The following stated example processing procedures shall be considered as use not
for the intended purpose:
– The use and / or processing of explosive substances.
– The processing of materials other than those stated for the intended purpose.
– The operation of the welding laser system in potentially explosive atmospheres.
– The operation of the welding laser system without fully fitted safety devices.
– Use by private users or users without professional instruction and training.
– The storage of explosive or highly flammable materials in the vicinity of the welding
laser system.
To Next Page
Loading...
