IM Machine Name Rev.: END 25
Instructions for the Operating Company
● As the operating company, ensure that the functional checks of the safety devices
on the welding laser system are carried out by trained personnel, not only before
the initial commissioning but also before every further new commissioning.
● As the operating company, provide the operating personnel with the necessary
personal protective equipment (PPE) and also ensure that it is used.
Electro-technical Instructions
Threat to life from electric shock
An electric shock can have fatal injuries as a consequence.
● Connect the welding laser system and additional devices in
accordance with the instructions. Unequivocally comply with
the regulations.
● At regular intervals, check all safety-related switching devices
for their correct function.
● Never remove, bypass or adversely affect safety devices (such
as, for example emergency switches, limit switches or key
switches).
● Allow the controls of the system to be operated only by trained
and instructed personnel.
● Allow repair and maintenance work to be carried out only in the
disconnected condition (voltage free) and only by a qualified
electrician.
A qualified electrician is someone who, due to his or her professional training,
knowledge and experience as well knowledge of the relevant regulations, is able to
assess the work assigned to him or her and to recognize potential hazards.
To Next Page
Loading...