IM Machine Name Rev.: END 7
– The installation of the welding laser system in unprotected, weather-exposed
rooms or halls.
2.4 Residual Risks
Even with the compliance with all safety regulations, the residual risks described
below remain during the operation of the welding laser system.
● As the employer / operating company, ensure that all personnel that work on or
with the welding laser system are aware of the residual risks.
● Follow the instructions that prevent the residual risks from leading to accidents or
injury or damage.
During setup and preparation work, it may be necessary to disassemble in-house
fitted safety devices. Various residual risks and potential dangers which every
operator must make him- or herself aware of arise through this:
Danger to life due to electric shock
Electric shock can result in fatal injuries.
● Before all repair, setup and maintenance work, disconnect the
welding laser system from the power supply.
● Secure the welding laser system against unintentional
switching back on.
● In addition, activate an Emergency Stop button.
To Next Page
Loading...
