IM Machine Name Rev.: END 51
7 Disposal
7.1 Environmental Protection
Environmental pollution through substances hazardous to water
These substances can pollute the soil and ground water or enter
the sewer system.
● For all work
● Observe that, in particular during on and with the welding laser
system, observe the statutory obligations for the avoidance of
waste and proper recycling / disposal.
● Comply with the relevant, valid statutory regulations when
disposing of consumable or replacement materials during the
maintenance or the decommissioning of the welding laser
system. installation, repair and maintenance work, substances
hazardous to water such as lubricating greases and oils,
emulsions and petrol -containing liquids must not pollute the
soil or enter the sewer system.
● Observe that these substances must be stored, transported,
collected and disposed of in suitable containers.
7.2 Oil and Oil-containing Waste, Lubricating Greases
Oil and oil-containing waste as well as lubricating greases represent a potentially high
risk to the environment. Their disposal is, therefore, carried out by specialist
companies.
● Bring this waste to the internal company waste management that then passes it
on to the specialist companies.
7.3 Plastics
● Sort the used / processed plastics as far as is possible.
● Dispose of plastics in accordance with the statutory requirements.
7.4 Metals
● Separate the used / processed metals as far as is possible.
● Have the metals disposed of by an authorized company.
To Next Page
Loading...