EasyManua.ls Logo

Siro Lasertec SL10 - Commissioning, Switching on and off; Commissioning

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
IM Machine Name Rev.: END 30
5.3 Commissioning, Switching On and Off
WARNING
Danger from optical radiation
Class 4 laser light is very dangerous for the eyes and dangerous
for the skin. Even diffusely scattered radiation can be dangerous.
The laser beam can cause fire and explosion hazards. The closed
slats in front of the work chamber downgrade the laser radiation to
Class 1..
Avoid exposing the eyes or skin to direct or scattered radiation.
Before starting up the welding laser system , check that all
safety devices are installed and function correctly.
Never operate the laser with open or damaged slats in front of
the work chamber.
Commissioning
Insert the mains plug into a suitable socket outlet
Switch on the welding laser system using the key switch.
Illustration 10 Setting
Press the Settings button in the lower right-hand corner to open the Settings.
Enter the password “666666”.

Table of Contents

Other manuals for Siro Lasertec SL10