IM Machine Name Rev.: END 40
6.3 Maintenance Plan
● Carry out the maintenance work at the following specified time intervals. The time
intervals relate to single-shift operation Adapt the time intervals accordingly to
multi-shift operation. This work ensures the consistent, trouble-free function of the
welding laser system.
● Observe the Maintenance Plan in the Annexes of this instruction
manual
The work that must be carried out weekly, monthly or annually at the indicated
positions is shown in the Maintenance Plan.
● Check the safety devices and safety
equipment.
● Check the monitoring equipment.
● Check the indicator elements.
● Clean all the components of the system.
● Check all components for wear.
● Filter fleece change
● Water change
● Cleaning and, if necessary, replacing the
protective glass of the lens
● Check the electrical connections for firm
seating.
● Check all safety devices, they must be
checked individually, for:
– condition
– firm seating
● Check the Emergency Stop button with
detent function for:
– condition
– function
● Check signal lamps for:
– function
● Check the function of the entire system.
To Next Page
Loading...
