Page 5
EN
Operating instructions table of contents
7.3.5 Display and documentation
functions 73
8. Commissioning 74
8.1 General commissioning 74
9. Display and control elements
of control screen 75
9.1 KFGS series 75
9.1.1 Three-digit LED display 76
9.1.2 LED display 78
9.1.3 Pushbutton operation 79
9.2 KFGC (CAN bus) series 80
10. KFGS display mode 82
10.1 KFGS series 82
11. KFGS programming 84
11.1 Start programming mode 84
11.2 Change lubrication interval times 84
11.4 Change operating modes 87
11.5 Change access code 88
11.6 Programming ranges 89
11.7 Display ranges 89
12. KFGS operating modes 90
12.1 Timer operation 90
12.2 Counter operation 90
12.3 No system monitoring 90
12.4 With system monitoring 90
12.5 Fill level monitoring 91
12.6 Monitoring via piston detector 91
12.7 Monitoring via pressure switch 92
13. Shutdown 93
13.1 Temporary shutdown 93
13.2 Permanent shutdown 93
14. Maintenance 94
14.1 General information 95
14.2 Service 95
15. Operational and pump faults 97
15.1 KFGS operational malfunctions 97
15.1.1 General 97
15.1.2 Display faults 97
15.1.4 Fault types 98
15.1.5 Recording fault times 99
15.1.6 Maintenance and repair 99
15.1.7 Malfunctions on pump unit
in progressive system 100
15.1.8 Malfunctions
on KFG/KFGS pump units 101
15.2 Operational malfunctions on
KFGC (CAN bus) 103
15.2.1 Pump malfunctions 103
15.2.2 Faults detected by control unit 103
15.2.3 Fault types 103
15.2.5 Read faults 103
15.2.6 Remedy faults 103
15.2.7 Warning and malfunction indicator
on KFGC (CAN bus) pump unit 105
16. Technical data 107
17. Accessories 111
17.1 Connectivity for timer operation
control, piston detector and
indicator light 112
To Next Page
Loading...
Need help?
General
